Friday 13 March 2020

Lupine Publishers|Wheat Leaf Rust Detection at an Early Stage with Atomic Force Microscopy (AFM)

Lupine Publishers|Environmental Journals

Abstract


In this study, we demonstrated the early stage wheat rust diagnosis using Atomic Force Microscopy (AFM). Wheat rust is a common disease, caused by parasitic fungus and reduces crop yield up to 30 to 40 percent by effecting leaf and stem of plant. The wheat seed having fungus are the carrier of rust infection for the plant. The infected seed and rust fungus not only reduce food quantity but effect its quality. In our experimental research, the wheat leaf sample of day 10, 27, 35 and 45 were analyzed. The rust appears after day 24 on leaf, and rusted leaf has higher surface roughness than the normal one. We analyzed shape, surface structure of normal and rusted wheat leaf surface with AFM. The leaf protein and structure with high-resolution AFM imaging under controlled environmental conditions. The results revealed the morphological details of normal and viral infected proteins of wheat leaf with high-resolution in vivo study. The findings provide the basis for AFM as a useful tool for investigating microbial-surface structures and properties at an early stage of rust. We can visualize the starch granule surface at different stages of maturity reveals information regarding the development of granule architecture. The changes in infected leaf compared to normal can be seen at starch granule interior throughout the growth. Leaf surface shows depressions on the granule surface and changes in protein for the infected, and we can manage the disease at an early stage of rust development. These results will be used for an early stage detection of wheat rust and can be extended to other crops diseases detection using AFM and laser-scanning microscopy.
Keywords:Atomic Force Microscopy (AFM); Wheat Rust; Fungal Infection; viral detection

Introduction

In recent decades, there has been impressive growth in food production worldwide, which have been attributed to the development of improved, disease-resistant varieties, increased use of chemical fertilizers and pesticides. Although enough food is produced, but yet this food and the technology to produce it does not match the requirements and as a result about thousand million people do not get enough to eat and several millions die worldwide from hunger or hunger-related diseases [1-3]. During the period 1995 to 2050, the world’s population is projected to increase by 75 percent and food security projected to become more critical, increasing wheat yield potential in the developing world remains a high priority [4]. Among the other fungal and viral infections, wheat leaf rust caused by viral fungus continue to pose a major threat to wheat production over large areas, particularly in Asia. Rust diseases significantly influence several crop species and considerable research focuses on understanding the basis of host specificity and resistance. Like many pathogens, rust fungi vary considerably in the number of hosts they can infect, such as wheat leaf rust (Puccinia triticina), which can only infect species in the genera Triticum and Aegilops. Rusts often produce spots similar to leaf spots and are bright yellow, orange-red, reddish-brown or black in color. The pustules are usually raised above the leaf surface, and some types of rust occur on stems. Rusts are common on grains and grasses [5-7].
Wheat rusts spread rapidly over long distances by wind. If not detected and treated on time. For effective integrated management of wheat rust diseases close monitoring, international collaboration and strengthening of national capacities are crucial. Although in certain cases fungicide application may be necessary, preventive approaches are the most effective and environmentally friendly means of wheat rust management. specialists from international institutions and wheat producing countries work together to stop these diseases that involves continuous surveillance, sharing data and building emergency response plans to protect their farmers and those in neighboring countries. In general, a fungal infection can cause local or extensive necrosis and can inhibit normal growth of entire plant [8-10].
Several studies worldwide have been carried out for early rust detection. We have applied the surface morphological structure characterization using atomic force microscopy (AFM). It is a non-invasive method and are used for a variety of materials in surface science, biochemistry and biology [11-12]. It is a powerful technique and has the ability to obtain topographic information on, and surface morphology of, the sample. It can also use to investigate chromosomes, proteins, living cells, carbohydrates and DNA [13]. In addition to obtain detailed structural information on the sample and allows us to visualize the cell surface properties on the nanometer scale [14]. Atomic force microscopy (AFM) provides images of biological structures without requiring labeling and to follow dynamic processes in real time. In structural biology, it has proven its ability to image proteins and protein conformational changes at sub molecular resolution, and in proteomics, it is developing as a tool to map surface proteomes and to study protein function by force spectroscopy methods. The power of AFM to combine studies of protein form and protein function enables bridging various research fields to come to a comprehensive, molecular level picture of biological processes [15]. In this study, a wheat leaf rust through the field experiment by the identification and disease index inversion is investigated successfully at an early stage with AFM. The aim of this study is to provide a method for monitoring and evaluating the diseases, so that proper management for rust protection can be made will in time.

Materials and Methods

The normal and rusted wheat leaf were collected during the season from National Agricultural Research Council (NARC). The samples were fixed, and changes are observed using the Atomic Force Microscopy (AFM, Alpha Contac, Germany). About 40 samples including 10 control and 30 rusted are taken from field. The AFM system installed at National Institute of lasers and Optronics (NILOP) used to analyze the fresh sample taken from field in 1 to 2 hours. The sample of day 10, 27, 35 and 45 are observed. The rust appears after day 24 on leaf, and rusted leaf has higher surface roughness than the normal one. The surface imaging was performed in the contact mode in air. Silicon nitride tips (Alpha Contac, Germany) were used for all AFM experiments. The radius of the cantilever of the tip was 7 nm and the diameter of the tip was 14 nm. The length of the cantilever was 12.6 μm, thick-ness 3.52-4.08 μm, width 30-31 μm, and had an oscillation frequency of 287-336 kHz and a force constant of 28-45 N m-1. The images were analyzed by using WSXM 4.0 Develop 12.1 software for gaining information from the topography of the cells. The observation was performed inside a chamber at room temperature [1,2,3,16].

Results and Discussion

The leaf rust, caused by Puccinia triticina, is an important disease in most wheat growing areas. The use of genetic resistance is the most economical and environmentally friendly way to combat this disease. For early stage rust fungus detection, several conventional methods are being utilized [17-18]. Atomic force microscopy is a powerful technique, which allows surface imaging of non- conducting samples in nanometer scale. In this experiment wheat leaf are imaged under ambient conditions, i.e. in air and with minimal sample preparations. The wheat corps of normal and rusted field are shown in Figure 1. Determining the time and scale of primary infections is also difficult with leaf rust because P. triticinainfected wheat crops show weak symptoms during the latent period of the disease. The samples were collected from the field for day 10, 27, 35 and 45 and shown in Figure 2. The rust appears after day 24 on leaf, and rusted leaf has higher surface roughness than the normal one Leaf rust symptoms are also checked several times to distinguish it by stem rust outbreaks at different time. Wheat leaf rust samples collection and examination of signs and symptoms in the field is very essential before AFM test. In some cases, diagnosis of leaf rust often requires isolation of the fungus and identification of the fungal pathotypes on differential host genotypes, which is complicated and time-consuming. Monitoring and early detection of this disease is crucial for the effective control and implementation of measures. Recent developments of remote sensing technology had the potential to enable direct detection of plant diseases under field conditions. However, sometime due to poor resolution the detection probability reduces.
Figure 1: The field picture of wheat leaf normal and rust fungus infection crop overview.
lupinepublishers-openaccess-journal-environmental-soil-sciences
Figure 2: The wheat rusts fungal infected leaf samples of day 10 (a) normal and for day 27 (b), day 35(c) and day 45(d) are collected and analyzed with Atomic Force microscopy (AFM) topographic, phase images, and their cross-section analysis.
lupinepublishers-openaccess-journal-environmental-soil-sciences
The AFM study of rusted wheat leaf from very early stage of growth provides a means to quantify their mechanical properties and examine their response to nanoscale forces, pulling single surface proteins with a functionalized tip allow one to understand their role in sensing and adhesion. The combination of these nanoscale techniques with modern molecular biology approaches, genetic engineering and optical microscopies provides a powerful platform for understanding the sophisticated functions of the plant machinery, and its role in the onset and progression of complex diseases. Topographic image and the cross-section analysis of the samples of day 10, 27, 35 and 45 were imagine with AFM. The results can be seen in Figure 3 for the sample collected on day 10 (normal sample). It can be seen in Figures 2(a) & 3, no fungus attack is observed on leaf and it represents normal study. The rust fungus appears after day 24 on leaf, and rusted leaf has higher surface roughness than the normal one at day 10. The leaf starch granule surface structure can be seen in Figure 3. The observation represents essentially a top view of the surface enabling estimations in two and three dimensions of the size of different microstructures. The rust fungus appears after day 24 and the sample in Figure 2(bd) and two and three-dimensional AFM images in Figure 4. As seen in the topographic image block lets are clearly visible in image.
Figure 3: The Atomic Force microscopy (AFM) 2D and 3D topographic, phase image of Wheat leaf rust infection at day 10 for normal leaf. Scale of the axis of the cross-section analysis of topographic is 10 μm, angle 10-15o, whereas depth is 2.4 nm.
lupinepublishers-openaccess-journal-environmental-soil-sciences
Figure 4: The Atomic Force microscopy (AFM) 2D and 3D topographic, phase image of Wheat leaf rust infection at day 45 for rust fungus infection. Scale of the axis of the cross-section analysis of topograph is 10 μm, angle 10-15o, whereas depth is 2.4 nm.
lupinepublishers-openaccess-journal-environmental-soil-sciences
The AFM 2D and 3D images had dimensions between 10 x10 μm. Apparently, the blocklets were clustered or fused together at different heights forming nodules and are mostly elongated in shape. Depressions were also observed on the surface of the granule. Phase image in an AFM study highlights the stiffness of the sample surface. It records the phase lagging between the cantilever oscillation and the phase of driving signal giving an indication of relative stiffness at different locations of the surface of the sample, indicating rust formation. Thus, phase images can be utilized to recognize fungus and understand the microstructure inside depressions, which were hidden in the topographic image. The topographic image shows some corresponding features, surface roughness hinders the identification of domains. The phase image allows unambiguous resolution of the different material phases. The surface of the day 35 and 45 are similar to day 27 and indicate that top of the nodules was mostly stiffer than valleys, as shown in Figure 4.
The cross-section analysis of phase images, the stiffness of granule surfaces for normal and rusted leaf is different. The phase image further visualized the texture of surface depressions, which may be hidden in the topography, and the presence of deep gaps dividing bundles of nodules from each other. In contrast to the surface with blocklets commonly observed and reported in literature [19]. We can see that the presence of 4.5 nm deep depressions with higher stiffness similar to regular granule surface in the background of the amorphous surface suggests that these depressions likely extend to the underneath semi-crystalline growth ring. These depressions might also be a part of internal channels. The wheat tissue morphology can be described as a succession of more or less thick layers including the starchy endosperm layer, the protein stored as granules in the cells of plant seeds layer and the internal cells layers with external pericarp.
In past some researchers worked on an optical light detection for visible and near-infrared region to detect different types of rust at the leaf scale [20]. In this study, none of these indices were able to detect and discriminate the types of rust. However, the anthocyanin reflectance index can be used to detect yellow rust, and the transformed chlorophyll absorption and reflectance index can be used to detect leaf rust [21]. In another study conducted by Frank and Menz, hyperspectral and leaf multispectral data were used to estimate the severity of wheat leaf rust [22]. Results indicated that leaf rust could be detected in the early symptoms by using hyperspectral data. The algorithm used in this research was based on the minimum noise fraction transformation. The reflectance spectra of the infected, non-infected, and dry area, as well as the soil class were taken at the canopy level. Ashourloo et al. showed that the disease symptoms have a high impact on the infected plant reflectance spectra [23]. This means that as the disease severity increases, so does the collected spectrum variations at a specific disease severity. Results showed that as the disease severity increases, the scattering of the numerical values for all of the indices also increases. For the different amounts of scattering and classification accuracy are not the same and depend on the wavelength of light used. Wheat leaf rust at the leaf scale was studied for two purposes, one is to estimate the reflectance spectra of various disease symptoms; and other is to introduce an index for precise determination of disease severity using the spectral reflectance of leaf [24]. In our previous study we have applied optical detection techniques to several viral infection monitoring using human blood in vivo and in vitro [25-32].

Conclusion

In this, experimental studies we demonstrated that Atomic Force Microscopy AFM provides a powerful platform for detect wheat leaf rust fungus at nanoscale level. The main advantages of AFM are the ability to image and manipulate early stage fungus infection at nanometer resolution and its operation under a wide variety of physiological conditions for quantifying the physical properties of cellular structures and leaf surface molecules topography and structure morphology. The applied technique provides early stage detection of fungus pathogen, when it it cannot be observed visually. So, the protection management with anti-pathogen chemicals can be made to save the crop from disease. The development and combination of multiple orthogonal, yet complimentary, biophysical tools will clearly play a major role in illuminating a deeper understanding of the complex interplay between physical and biological information.
Collaborations between the Nano, physical and life sciences will lead to the AFM being used more routinely in studies of fundamental and complex biological processes. Such studies will lead to the understanding of the importance of the physical mechanisms governing fungal infection and its characteristics in biology. The atomic force microscopy (AFM) provides the structural, mechanical strength, topography, and surface morphology of the sample in easy way. The information related to the rust fungus infection at an early stage can facilitate the wheat management planning. AFM qualitative and quantitative imaging of granules and stomata support blocklet structural information of diverse starch systems. This imaging methodology will enhance other early stage rust detection techniques to be utilized for wheat food improvements.


To Know More About Open Access Publishers Please Click on Lupine Publishers

 



Lupine Publishers: Lupine Publishers | Acute Erythroblastic Leukemia ...

Lupine Publishers: Lupine Publishers | Acute Erythroblastic Leukemia ...: Lupine Publishers | Open Access Journal of Oncology and Medicine   Abstract Acute erythroblastic leukemia is characteriz...

Wednesday 11 March 2020

Friday 6 March 2020

Lupine publishers|Removal of Pharmaceutical and Personal Care Products PPCPs from Wastewater

Lupine Publishers|Environmental journals

Abstract


Water pollution gained worldwide attention due to the severity of the concern where many places of the world are going through the drought and groundwater pollution. Pharmaceuticals and personal care products (PPCPs). PPCPs are the unadorned and noxious pollutants, although water purification processes by various techniques as bioremediation, phytoremediation, conventional wastewater treatment etc. are taking place. For PPCPs, there are no specific method is discovered yet where convention treatment is found inappropriate for the same. This research will lead the PPCPs removal from the industrial wastewater, which comprises the photo catalysis as well as absorbent method. Photo catalysis, an emerging concept is trusted as effective treatment methods for the removal and determination of PPCPs from wastewater treatment because of the efficiency and feasibility. Furthermore, a detailed studyis required on blending other techniques with the photo catalysis like Advance Oxidation Process (AOP)and absorbent method. This research will focus on the thorough purification of PPCPs from wastewater through Photo-catalysis and Advance Oxidation Process (AOP) [1,2].
Keywords: Wastewater; PPCPs; Photo catalysis; Wastewater Treatment

Introduction

Water is the basic component that supports life on the earth and the precious natural resource. Water pollution is the key concern worldwide, which is to be a cure at every level. Industrial wastewater is treated at every possible way and it is utilized for the irrigation and aquaculture. India is holding the third position in terms of Pharmaceutical industries by volume. Which contribute a large variant of water pollutant in low concentration. Pharmaceutical and Personal care Products (PPCPs) are the emerging pollutants in wastewater, which is not efficient removed even after the conventional wastewater treatment. However, it may not cause any immediate effect to the life on the earth, but it may be big concern when it will be exposed a longer period [3-5]. The scientific and industrial communities are still a long way from the most effective, economic and applicable methods to reach these goals and overcome the current WWTP challenges. Although the challenges of the removal of PPCPs from wastewater treatment are significant, a number of these challenges are possibly temporary, including economic, technical and environmental hurdles. A serious collaboration between research, industrial and governmental sectors is essential to solving these challenges. There are some researches, which is taking place in various research centers worldwide [6].
Currently, in the available literature, most studies Advance Oxidation Processes are Fenton Oxidation process, Ozone Oxidation, H2O2 Oxidation, Electrochemical methods and Nonchemical methods as well as photochemical degradation using UV. It is found, there is a need to coupled advance oxidation processes. PPCPs can be removed efficiently by using Physical and biological agents combined. Therefore, the biological couplings with chemical techniques are not covered yet in the literature. It may produce the efficient removal of PPCPs from the wastewater [7].

Literature Review

L. T. Lemmuel et al. (2018) elaborated about the recent research on PPCPs removal. Study states that the advances in analytical chemistry instrumentation, low levels of PPCPs can now be detected by mass spectroscopy which may be coupled to either liquid or gas chromatography. Adsorption is the most popular physical method, which is often used for removal of trace organic pollutants in water and one of the main processes for removing PPCPs in the environment. For biological approaches the use of microbes for degradation processes are the most important removal mechanism for organic pollutants in the environment, which has many advantages such as low cost and mild operational conditions. Microbes in either pure culture or mixed cultures can remove the pollutants by utilizing the essential elements or the carbon backbone of the PPCPs for their metabolic functions and in most cases the microbial consortia cooperate together in the removal of the pollutants. Some of the well-known advanced oxidation (AO) methods are ozonation, UV oxidation processes, conventional Fenton oxidation and Fenton-like systems, photocatalysis, ultrasonication (US) and electrochemical methods, while rapidly evolving advanced oxidation technologies include ionizing radiation, microwaves, pulsed plasma and the use of ferrate reagent. Current technologies for AOPs can be employed either alone or in combination with other physico-chemical or biological processes for actual wastewater treatment [8].
J. E.Anekwe et al. (2017) explained that PPCPs are a group of emerging contaminants with physicochemical characteristics that distinguish them from other contaminants (e.g. persistent organic pollutants). Pharmaceuticals are structurally designed to maximize their biological activity at low concentrations and developed to produce a prolonged action. These properties highlight the risks associated with the inadvertent presence of PPCPs in the environment. S. Honglan et al (2012) concluded in his study that emerging contaminant compounds occur in trace concentrations in waters, their adverse effects to aquatic organisms, animals, and humans cannot be underestimated due to their continuous release into the water systems. The assessment and removal of emerging contaminants and their transformation products in natural and drinking waters are challenging tasks because of the complexity of contaminants in water samples. However, tremendous progress has been made on assessment of many emerging contaminants due to the great efforts and times committed by many scientists working in different research fields. The effectiveness of the treatment depends not only on the properties of the technique, but also on various environmental conditions and variables used for the processes, e.g. in physical removal process, it depends on pH, ionic strength, temperature, existence of competing organic or inorganic compounds in solution, initial adsorb ate and adsorbent concentration, contact time and speed of rotation, particle size of adsorbent, etc [9].
S. Esplugas et al. (2007) studied and stated AOPs (Advanced oxidation processes) such as UV/H2O2 or UV/O3 processes should be considered for their effective removal. Advanced oxidation processes (AOPs) constitute a promising technology for the treatment of wastewaters containing pharmaceuticals and personal care products (PPCPs) and especially endocrine disrupting chemicals (EDCs). Data concerning the degradation of PPCPs and EDCs by means of AOPs. Ozonation is the oxidation process most studied, gives the best expectative because feasible techniques need to be in place to remove them or at least reduced them below the regulated levels. Identification of the contaminants PPCPs can be done with the help of HPLC, GC-MS and LC-MS etc. whereas the removal of PPCPs can be experiment by using various absorbents and Photo-catalytic agents (Figure 1) [10].
Figure 1: General mechanism of PPCP degradation using advanced oxidation processes.
lupinepublishers-openaccess-journal-environmental-soil-sciences

Conclusion

Analytical and environmental application Such as removal of PPCPs, reduction of a waterborne pathogen or antibacterial tests as well as physicochemical analysis of industrial wastewater quality, it helps to achieve the sustainable development goals for e.g. clean water and sanitation. More attention and efforts should be given to these topics to be developed and know all details concerning the toxicity of PPCPs and how can be removed from our environment.


To Know More About Open Access Publishers Please Click on Lupine Publishers 


Soil and Environment

  Mini Review Soil is a blend of natural issue, minerals, gases, fluids, and life forms that together help life. Earth’s collectio...